Nonwoven Matte Polyester Sail Cloth Permanent Adhesive Labels
#106050 - MATTE PERMANENT FABRIC LABELS
This is a 3.4mil bright white non-woven polyester fabric, coated for laser printing. The face stock is a flexible, top-coated white nonwoven matte polyester. The clear acrylic adhesive is permanent on many surfaces. It has a minimum application temperature of 10°F and a service temperature range of -40°F or lower to over 300°F (limited to melt temperature of vinyl Facestock 302°F – 446°F), making it very versatile for cold or hot environment usage, such as a heat room or refrigerated warehouse. This is similar to sailcloth but with a very aggressive permanent adhesive.
Short Run
| Sheet Ct. | Price Per Sheet | ||
|---|---|---|---|
| 8.5″ × 11″ | 8.5″ × 14″ | 8.5″ × 17″ | |
| 10 | $9.07 | $10.73 | $12.38 |
| 25 | $5.92 | $7.21 | $8.50 |
| 50 | $4.65 | $5.75 | $6.86 |
| 100 | $3.30 | $4.03 | $4.77 |
| 250 | $2.62 | $3.18 | $3.73 |
| 500 | $2.46 | $2.96 | $3.47 |
Price includes die cutting sheets up to 30 cuts (see Plus Charges for additional cuts) with any shape or size.
Long Run
| Sheet Ct. | Price Per Sheet | ||
|---|---|---|---|
| 8.5″ × 11″ | 8.5″ × 14″ | 8.5″ × 17″ | |
| 500 | $1.01 | $1.29 | $1.56 |
| 1000 | $0.91 | $1.16 | $1.41 |
| 2000 | $0.84 | $1.07 | $1.30 |
| 5000 | $0.74 | $0.94 | $1.15 |
| 10000 | $0.67 | $0.86 | $1.04 |
| 20000 | $0.57 | $0.76 | $0.94 |
Cutting die required. Pick one of our 3,000+ dies free of charge or create a new die. No die required for blanks.
| Physical Properties | Value |
|---|---|
| Thickness (without liner/adhesive): | 3.4 mil |
| Temperature Resistance: | -40°F to 300 °F |
| Adhesive: | Emulsion Acrylic |
| Adhesion Power: | 3.4 lb/in |
| Tensile Strength MD: | 3,000 PSI |
| Tensile Strength CD: | 3,500 PSI |
| Minimum Application Temperature: | 10°F |
Product Information
Description:
This durable vinyl material features a special water-based matte topcoat that offers excellent toner anchorage and printability. An aggressive permanent acrylic adhesive with excellent clarity, high initial tack, high shear and ultimate adhesion make it suitable for application to a wide variety of surfaces. Applied labels will be resistant to water, mild acids, bases, salts, most petroleum based oils, greases and aliphatic solvents. The kraft liner gives a controlled release.
Facestock:
- Flexible, top-coated white vinyl for excellent dry laser toner anchorage (Not Thermal Transfer Ribbon compatible).
- Caliper: 3.4 mils
- Opacity: N/A
Adhesive:
- Emulsion Acrylic
- Caliper: .9 mils
- Min. application temp: +10°F
- Min. service temp: -40° F
- Max. service temp: +300°F
- Indirect Food Contact: Yes
Note: For best bonding conditions, application surface should be at or above minimum application temperature. Low temperature surfaces, below +10F can cause the adhesive to become so firm that it will not develop maximum contact with the substrate. Higher initial bonds can be achieved through increased rubdown pressure. In order to get a true measure of the adhesive’s effectiveness, the label should be applied and allowed to bond a minimum of 24 hours prior to evaluation.
- Loop Tack: 2.77 lbs
- Peel Adhesion: 4.1 lbs
Aluminum
- Loop Tack: N/A
- Peel Adhesion: 4.4 lbs
Alkyd Enamel Paint
- Loop Tack: N/A
- Peel Adhesion: 3.9 lbs
Polypropylene
- Loop Tack: N/A
- Peel Adhesion: 4.3 lbs
HDPE
- Loop Tack: N/A
- Peel Adhesion: 4.6 lbs
Liner:
- Bleached kraft paper liner featuring good back printability
- Caliper: 4.9 mils
- Weight: 79#
The above specifications are up to date and are the typical and accurate values. We cannot take responsibility for damage to the product that is caused by use outside of our control.