Clear on Clear No Label Look Permanent Stick Labels
#102590 - CLEAR POLYESTER PERMANENT LABELS
Both the printable clear poly Facestock and the liner are clear on this ultra glossy self-adhesive product. This clear poly label was developed for graphics applications where the label needs to disappear to emphasize the graphics. The super-clear acrylic adhesive is adaptable to many surfaces with a minimum application temperature of 53°F and a service range -40°F to 302°F.
Printing on 102590 requires graphics that are compatible with super translucent materials. Resistance to water and abrasion is technique based, determined by the customer. Because this material is so smooth printer resolution must be adjusted to 300×300 dpi or 600×600 dpi to assure best toner anchoring and to minimize toner splatter. 102590 is excellent for indoor and short term outdoor applications.
Applying a clear label to a dark surface?
Short Run
| Sheet Ct. | Price Per Sheet | ||
|---|---|---|---|
| 8.5″ × 11″ | 8.5″ × 14″ | 8.5″ × 17″ | |
| 10 | $8.57 | $10.91 | $13.24 |
| 25 | $6.67 | $8.48 | $10.30 |
| 50 | $5.71 | $7.27 | $8.83 |
| 100 | $3.81 | $4.85 | $5.89 |
| 250 | $2.86 | $3.64 | $4.41 |
| 500 | $2.62 | $3.33 | $4.05 |
Price includes die cutting sheets up to 30 cuts (see Plus Charges for additional cuts) with any shape or size.
Long Run
| Sheet Ct. | Price Per Sheet | ||
|---|---|---|---|
| 8.5″ × 11″ | 8.5″ × 14″ | 8.5″ × 17″ | |
| 500 | $1.43 | $1.82 | $2.21 |
| 1000 | $1.29 | $1.64 | $1.99 |
| 2000 | $1.19 | $1.51 | $1.84 |
| 5000 | $1.05 | $1.33 | $1.62 |
| 10000 | $0.95 | $1.21 | $1.47 |
| 20000 | $0.85 | $1.11 | $1.37 |
Cutting die required. Pick one of our 3,000+ dies free of charge or create a new die. No die required for blanks.
Let us print for you! Full Color Printing available.
Specifications
Description:
This Laser Gloss Ultra-Clear Polyester label is nearly invisible in most substrates. The special gloss topcoat provides an acetate-like appearance and permits high-resolution laser printing. Its high-tack permanent acrylic emulsion offers extended life on many surfaces. It is dimensionally stable and has a two-year expected outdoor life. This product is not recommended for indirect food contact.
Facestock
- Clear polyester film top-coated to accept laser toner
- Caliper: 2.0 mils
Adhesive:
Permanent pressure sensitive acrylic. Application environments and certain surfaces such as vinyl, glass, acrylic, styrene and polycarbonate can cause increased adhesion and adhesive transfer. We recommend that all surfaces be tested for compatibility.
- Caliper 0.8 mils
- Min. Application Temp: +53°F
- Min. Service Temp: -40°F
- Max. service temp: 302°F
Note: For best bonding conditions, application surface should be at room temperature or higher. Low temperature surfaces, below 50°F can cause the adhesive to become so firm that it will not develop maximum contact with the substrate. Higher initial bonds can be achieved through increased rubdown pressure. Maximum bonding occurs in 24 hours.
Liner:
- Ultra-clear polyester quick-release liner
- Caliper: 4.0 mils
The above are typical technical values and are given in good faith based upon our most up to date knowledge and experience. As the products are used outside our control we cannot take responsibility for any damage that may be caused using the product. In every case, user shall determine before using any product in full-scale production, or in any way, whether such product is suitable for user’s intended use for their particular purpose under their own operating conditions.