Premium Matte Indoor Waterproof White Vinyl Removable Label
#102625 - PREMIUM MATTE REMOVABLE VINYL
This label material is waterproof and can be printed in desktop black and white or color laser printers. The label material was designed for chemical drum and other applications in harsh environments, but is also excellent for removable decals, vehicle signs, laboratory work, etc. The adhesive is a removable, clear acrylic that is adaptable to many surfaces and is FDA approved for indirect food contact. It has a special topcoating for laser printing.
Short Run
| Sheet Ct. | Price Per Sheet | ||
|---|---|---|---|
| 8.5″ × 11″ | 8.5″ × 14″ | 8.5″ × 17″ | |
| 10 | $9.03 | $10.67 | $12.31 |
| 25 | $5.89 | $7.17 | $8.44 |
| 50 | $4.62 | $5.71 | $6.81 |
| 100 | $3.28 | $4.01 | $4.74 |
| 250 | $2.61 | $3.16 | $3.70 |
| 500 | $2.44 | $2.94 | $3.45 |
Price includes die cutting sheets up to 30 cuts (see Plus Charges for additional cuts) with any shape or size.
Long Run
| Sheet Ct. | Price Per Sheet | ||
|---|---|---|---|
| 8.5″ × 11″ | 8.5″ × 14″ | 8.5″ × 17″ | |
| 500 | $1.00 | $1.28 | $1.55 |
| 1000 | $0.90 | $1.15 | $1.40 |
| 2000 | $0.84 | $1.07 | $1.29 |
| 5000 | $0.74 | $0.94 | $1.14 |
| 10000 | $0.67 | $0.85 | $1.03 |
| 20000 | $0.57 | $0.75 | $0.93 |
Cutting die required. Pick one of our 3,000+ dies free of charge or create a new die. No die required for blanks.
Let us print for you! Full Color Printing available.
Specifications
| Physical Properties | Value |
|---|---|
| Thickness (without liner/adhesive): | 3.5 mil |
| Temperature Resistance: | -40°F to 200°F |
| Adhesive: | Removable |
| Minimum Application Temperature: | 50°F |
| Tensile Strength: | MD 3,700 psi/CD 3.500 psi |
| FDA Approved – indirect food contact: | Yes |
Description:
This white vinyl label with general-purpose removable adhesive features a special water-based matte topcoat that offers excellent toner anchorage and is designed for printing in black and white (monochrome) desktop lasers. The Facestock resists degradation from scuffing, chemicals and wide temperature fluctuations. The removable acrylic adhesive offers good initial tack and was originally designed for shelf marking applications, and it has a stay-flat liner.
Facestock:
- White vinyl top-coated for excellent toner anchorage
- Caliper: 3.4 mils
Adhesive:
- Emulsion acrylic removable
- Caliper: 3.4 mils
- Min. Application Temp: 50°F
- Indirect Food Contact: No
- Min Service Temp: -20°F
- Max Service Temp: 176°F
Note: For best bonding conditions, application surface should be at room temperature or higher. Low temperature surfaces, below 50°F can cause the adhesive to become so firm that it will not develop maximum contact with the substrate. Higher initial bonds can be achieved through increased rubdown pressure. In order to get a true measure of the adhesive’s effectiveness, the label should be applied and allowed to bond a minimum of 24 hours prior to evaluation.
Liner:
- Bleached 55# kraft paper (lay-flat) liner that has been silicone coated one side to give a controlled release.
- Caliper: 4.6 mils
- Basis weight: 78# per ream
The above are typical technical values and are given in good faith based upon our most up to date knowledge and experience. As the products are used outside our control we cannot take responsibility for any damage that may be caused using the product. In every case, user shall determine before using any product in full-scale production, or in any way, whether such product is suitable for user’s intended use for their particular purpose under their own operating conditions.
Certifications
- REACH
- FDA approved for indirect food contact